Spectra Precision HR220
Spectra Precision HR220 - Image 2
Spectra Precision HR220 - Image 3

Spectra Precision HR220

The Spectra Precision HR220 laser receiver is designed to detect laser beams generated from crossline lasers including the 5.2XL, 1.3XL and 1.5PL. The receiver can extend the indoor working range of these crossline lasers as well as increasing versatility by allowing outdoor use. The HR220 includes a rod clamp that easily attaches to grade rods.

The HR220 Laser Receiver features include a large front LCD, a rear-corner Red-Green-Blue LED display, and dual horizontal and vertical level bubbles. A loud audible signal is also emitted and can be set to loud, low or off. The HR220 is waterproof and dustproof to IP67 standards and also withstands a drop of up to 1.5 meters (5 feet) to a hard surface.

For more information go to: http://www.spectralasers.com/en/products/laser-receivers.html

Изпратете запитване
Send an inquiry



Features

  • HR220 laser receiver allows work indoors or outdoors up to75 m (250 ft) and works in all horizontal and vertical applications
  • Magnetically attaches on ceilings or metal studs eliminating the need for addition accessories Includes a heavy duty rod clamp for elevation control across the jobsite
  • Squared off housing and marking notches on both sides make it easy to mark alignments and elevations
  • Tough composite housing protects against damage due to dropping for lower operating and repair costs
  • Long battery life and automatic shut off keeps the receiver ready to work when needed
Модел HR220
Точност ±1.0 mm (±1/32 in.)
Задни и предни LCD и LED индикатори за наклон Червени, зелени и сини
Аудио контрол Силен / Нисък / Без аудио контрол
Височина на отчитане  50 mm (2 in.)
Маркиране 50,0 mm (2 in) под горната част на приемника
Захранване 2 AA алкални батерии
Живот на батерията 50+ часа
Индикатори за ниско ниво на батерията LCD индикатор на батерията
Автоматично изключване 30 минути след последното действие или активиране с натискане на бутон
Усточивост срещу изпискане  1.5 m (5 ft) върху бетон при стайна температура
Водоустойчивост / Прахоустойчивост  Да - IP67
Работна температура от –20 °C до +60 °C (от –4 °F до +140 °F)
Температура на съхранение от –40 °C до +70 °C от (–40 °F до +158 °F)
Регулаторна съвместимост 2004/108/EC; 2002/95/EC; 2002/96/EC

 

manual spectra precision hr220

Features

  • HR220 laser receiver allows work indoors or outdoors up to75 m (250 ft) and works in all horizontal and vertical applications
  • Magnetically attaches on ceilings or metal studs eliminating the need for addition accessories Includes a heavy duty rod clamp for elevation control across the jobsite
  • Squared off housing and marking notches on both sides make it easy to mark alignments and elevations
  • Tough composite housing protects against damage due to dropping for lower operating and repair costs
  • Long battery life and automatic shut off keeps the receiver ready to work when needed
Model HR220
Accuracy ±1.0 mm (±1/32 in.)
Rear and front LCD and LED tilt indicators Reds, Greens and Blues
Audio control Loud / Low / No audio control
Report height 50 mm (2 in.)
Markup 50.0 mm (2 in) below the top of the receiver
Power 2 AA alkaline batteries
Battery Life 50+ hours
Low battery indicators LCD battery indicator
Auto Shutdown 30 minutes after the last action or button activation
Resistance against peeing 1.5 m (5 ft) on concrete at room temperature
Water resistance / Dust resistance Yes - IP67
Operating temperature from –20 °C to +60 °C (from –4 °F to +140 °F)
Storage temperature from –40 °C to +70 °C from (–40 °F to +158 °F)
Regulatory Compliance 2004/108/EC; 2002/95/EC; 2002/96/EC

manual spectra precision hr220

Related products