Soil Instruments Easy Connect (EC) Inclinometer Casing

Soil Instruments unique Easy Connect (EC) Inclinometer Casing is specially designed for inclinometer test systems which are typically installed in boreholes. However, its versatility renders it suitable for use in landfills, cast to concrete or attached to structures. EC (Easy Connect) Casing is an ABS inclinometer casing manufactured in 3m lengths using advanced extrusion techniques, resulting in an accurate groove profile with precise keyways formed at 90° into the internal surface. This allows for the accurate orientation of inclinometer probes and IPIs. Designed to replace traditional inclinometer casing, EC Casing is both faster and easier to install, with no rivets, tape or glue required. Just push together and the joint is made.EC Casing can be extended or jointed at any point along its length; telescoping couplings are also available to cope with significant settlement or heave.

For more information go to: https://soil.co.uk/products/inclination/



PRODUCT FEATURES 

  • Push fit, faster and easier to install than standard inclinometer casing
  • Reliable joints; a machined slot ensures consistent keyway alignment
  • Watertight; an ‘O’ ring on each seal prevents ingress of water or grout
  • Deep, tight groove profile ensures accurate data
  • Joints tested against pull apart, collapse and twist forces
  • Manufactured from virgin ABS
 

PRODUCT BENEFITS

  • Requires no rivets, tape or glue
  • Savings in installation time significantly reduces labour cost and drill rig standby charges
  • Can be used in conjunction with magnetic extensometers to form a combined inclinometer/extensometer
Модел Easy Connect (EC) Inclinometer Casing
Материал ABS (акрилонитрил бутадиен стирен)
Спираловиден улей < 0.5° / 3m
Издръжливост на натиск 1960kPa
Крайна оценка 252N
Максимална температура 80°C
Издръжливост на опън 585kgF
Усукване 25Nm
Размери
Ефективна дължина 3m
Дължина 3.06m
Външен диаметър 70mm
Вътрешен диаметър 59mm
Тежести
Корпусна обвивка 3.8kg
Крайна капачка 360g
Горна капачка 48g
Заключваща горна капачка 718g

PRODUCT FEATURES 

  • Push fit, faster and easier to install than standard inclinometer casing
  • Reliable joints; a machined slot ensures consistent keyway alignment
  • Watertight; an ‘O’ ring on each seal prevents ingress of water or grout
  • Deep, tight groove profile ensures accurate data
  • Joints tested against pull apart, collapse and twist forces
  • Manufactured from virgin ABS
 

PRODUCT BENEFITS

  • Requires no rivets, tape or glue
  • Savings in installation time significantly reduces labour cost and drill rig standby charges
  • Can be used in conjunction with magnetic extensometers to form a combined inclinometer/extensometer
Model Easy Connect (EC) Inclinometer Casing
Material ABS (acrylonitrile butadiene styrene)
Spiral chute < 0.5° / 3m
Pressure endurance 1960kPa
Final Score 252N
Maximum temperature 80°C
Tensile strength 585kgF
Twisting 25Nm
Sizes
Effective length 3m
Length 3.06m
Outside diameter 70mm
Inside diameter 59mm
Weights
Body shell 3.8kg
End Cap 360g
Top Cap 48g
Locking top cap 718g