Campbell Scientific NL121

The NL121 is the easiest and lowest-cost way to add an Ethernet interface connection to a CR1000 or CR3000. This small device, about the size of a deck of cards, simply plugs onto the datalogger’s peripheral port. Through the NL121, the Internet capabilities of the datalogger can be accessed, such as PakBus, Modbus, and DNP3 over TCP, as well as Web, email, file transfer, and cloud-based application clients. Using any standard IP network─within an office or across the Internet─data can be collected from the datalogger, and the datalogger can be controlled. 

For more information go to: https://www.campbellsci.com/communications



Benefits and Features

  • The easiest way to add Ethernet to a CR1000 or CR3000
  • Provides a native Ethernet connection, allowing the datalogger to communicate directly using a variety of Internet protocols
  • Integrated protection for surge and ESD
  • Datalogger-controlled power-management schemes for low-power operation
Модел NL121
Интерфейс на дейталогера 40-пинов периферен интерфейс на CR1000 или CR3000
Ethernet 10/100 Mbps, автоматично разпознаване на 10BaseT/100Base-TX, пълен-частичен дуплекс, IEEE 802.3, автоматичен MDI/MDI-X
Източник на захранване 12 V от дейталогери с 40-пинов периферни интерфейси
Консумация на енергия 55 mA стандартно
Обхват на работната температура от -40° до +70°C
Дименсии 10.2 x 6.4 x 2.8 cm (4.0 x 2.5 x 1.1 in.)
Тегло 66.62 g (2.35 oz)

 

Benefits and Features

  • The easiest way to add Ethernet to a CR1000 or CR3000
  • Provides a native Ethernet connection, allowing the datalogger to communicate directly using a variety of Internet protocols
  • Integrated protection for surge and ESD
  • Datalogger-controlled power-management schemes for low-power operation
Model NL121
Datalogger Interface 40-pin peripheral port on CR1000 or CR3000
Ethernet 10/100 Mbps, auto-detect 10BaseT/100Base-TX, full/half duplex, IEEE 802.3, auto MDI/MDI-X
Power Source 12 V from datalogger 40-pin peripheral port
Power Consumption 55 mA typical
Operating Temperature Range -40° to +70°C
Dimensions 10.2 x 6.4 x 2.8 cm (4.0 x 2.5 x 1.1 in.)
Weight 66.62 g (2.35 oz)
Compliance
Application of Council Directive(s) 2004/108/EC Electromagnetic Compatibility Directive (EMC)
Product Standard EN 61326-1:2013 – Electrical Equipment for measurement, control and laboratory use (EMC requirements – for use in industrial locations)
2011/65/EU The Restriction of Hazardous Substances Directive (RoHS2)